XMRig Setup On Four X Ryzen 3900X Miner For Monero RandomX

*********************** BIOS & WINDOWS SETUP (up up to now 11/6/2019) ***********************

Update the BIOS on the mom board earlier than attempting to start out. The mom board won't boot with the 3900X and not exploitation a BIOS replace.

Why Is The Money Maker

1) Copy the Firmware to a USB. It have to be empty.

2) Rename the Firmware to C7H.CAP

3) Turn off the facility. You use the 120V change.

4) Plug inside the USB to the port labeled BIOS on the underside left

5) Plug inside the energy provide. But, hold the mom board off. The warmth sink mild will flash.

6) Wait just a couple of minute after which press the BIOS button on the once again for Three seconds. The button ought to begin flashing.

7) Then press the button once once again for Three seconds. This would possibly take many makes an attempt. It is a ache inside the arse, all the same will finally load.

8) The button then ought to flash a wad faster for about 5 minutes. If LED goes stable on it's an error. Restart the facility and restart the flashing. Successful bios replace the BIOS button LED turns off after flashing quick.

9) The button LED ought to finally flip off.

BIOS EZ Tuning Wizard

1) Just run the EZ Tuning Wizard on the Top.

2) Choose Daily Computing on the left

3) Choose field fan on the left

4) Choose work pc (Do not select gaming)

5) Continue till Reboot

6) Do Not load earlier values except there's a system drawback

BIOS Setup CPU Voltage

1) In Extreme Tweaker / CPU Core Voltage / Set to Manual Mode

2) In CPU Core Voltage Override / Type in 1.100V inside the AUTO field

BIOS Memory Setup

1) In Extreme Tweaker / Ai Overclock Tuner / set to D.O.C.P Standard

2) In the following line ought to habitually present your specific recall stick settings

3) Menu Should automaticall set Memory Frequency to DDR4-3600MHz

BIOS Boot Setup

1) (To stop Q-Code 1F), flip off quick boot inside the Boot menu.

2) In Boot Configuration, Disable Boot up Numlock State

Put Batch File in Startup Folder to Run Miner Automatically.

1) Press Windows key and R

2) Run shell:startup

3) Put the file to run the miner inside the Starup Folder

StartXMRig.cmd

@echo off

TIMEOUT /T 20

c:MinerXMRigxmrig.exe

pause

HWMonitor.cmd

@echo off

begin "" "C:Program FilesCPUIDHWMonitorHWMonitor.exe"

exit

Windows Settings

1) Have word autoload

2) select Show Additional Plans and set Power Plan to High Performance

3) Have monitor not by a blame sigh flip off

4) Have pc not by a blame sigh sleep

5) Set Power Setting to High Performance

6) Update Advanced Options:

Check Recive updates on different microsoft merchandise.

Check Restart Device as quickly as potential.

7) Type User Account Control Settings and set to Never Notify

Enable Large Page Support in Windows 10.

1) From the Start menu, open Local Security Policy (below Administrative Tools).

2) Under Local Insurance policiesUser Rights Assignment, double click on the Lock Pages in Memory setting.

3) Click Add User or Group and kind your Windows individual identify and click on Check Names

4) Either log off after which log once again in or restart your pc - sadly it will not work with out this step.

DO NOT Install AMD Ryzen Master. It doesn't configure the CPU voltage under 1.2V

Download and set up HWMonitor from www.cpuid.com/softwares/hwmonitor.html

Go to the ASUS Motherboard website and obtain and set up.

1) Utilities

2) Chipset

Verify Mining is operational about 200 Watts whole and about 12,100 hash. Use CPUID HWMonitor to confirm the next.

1) All 12 core voltages are about 1.063V

2) Total Power for all cores is about 72W

3) CPU Temperature is about 65 deg C

*********************** XMRig Setup (Updated 11/20/2019) ***********************

1) Choose xmrig-X.X.X-gcc-win64.zip from https://xmrig.com/download

2) UnQuarantine the exe information from computer virus safety. This is regular as a result of many minerbots run xmrig algorithms to get free crypto. You power should unquarantine the exe file just a couple of occasions.

3) Copy all information to a miner listing. I commonly use c:MinerXMRig

4) Make certain to let computer virus safety end scan when transferring

Config File Setup

1) set "algo": "auto",

2) "url": "pool.supportxmr.com:5555",

3) In the "user": line put your monero deal with in quotes.

4) "keepalive": true,

5) "Donate-level": 1,

Install HWMonitor from https://www.cpuid.com/softwares/hwmonitor.html. The free model is ok.

Put Batch File in Startup Folder to Run Miner Automatically.

1) Press Windows key and R

2) Run shell:startup